How To Install A Cordless Mini Blind

How to Install Window Blinds

Updated: Jun. 26, 2022

Blinds are practical, relatively cheap and very piece of cake to install. Simply follow these steps and yous'll take your blinds installed in no fourth dimension at all.

Instructions for how to install window blinds.

Y'all might also like: TBD

Time

A full day

Complexity

Beginner

Cost

Varies

Inside- or outside-mount?

Mounting brackets for blinds: Inside- or outside-mount?

Await at your window and decide if you want to mount the blinds on the inside of the window frame (jamb) or outside and/or above the window frame. Inside-mounted blinds look tidy and that'southward the fashion to go in most situations. Outside mounted blinds embrace up part of the frame and the mounting bracket holes volition show if the brackets are removed at a later date. One compelling reason to become with outside mount is if the window frame is too shallow to accommodate the mounting brackets. If your window trim has holes from someone else'due south window hardware, here's how to fill those holes quickly and hands.

Make practiced choices

Make practiced choices

Most mini blinds are made of vinyl or aluminum. Wood and faux wood blinds are available at a higher cost. As well, blinds come either with a cord (for lowering and raising the slats) or without a cord (slats are raised and lowered by moving the bottom rail up or down.) Corded shades are readily available and cordless may need to be special ordered. Cords are a chance to young children, and then choose the safer cordless pick if kids will be around. If you lot accept a grandparent or other seniors living with you lot, check out these xvi helpful tips for making your domicile safer for older people.

Measure out and buy

Measure and buy

If y'all've chosen to inside-mountain your blinds, measure the width of the window space. Select a blind with a width that will fit inside the infinite. Don't go too narrow or yous'll have gaps that reduce privacy and let in likewise much light. For outside mount, measure the width you'd similar to cover upwards and select a blind with that width. Well-nigh blinds come up in standard widths to fit mutual window sizes. Some blinds can be custom-cutting where you buy them or, if you're not in a big bustle and y'all don't mind spending more, blinds can be custom-ordered to fit your dimensions.

Open the package

Open the package

When you open the box, grab the instructions and see what's supposed to exist included. Make sure information technology's all there before y'all do anything else. Besides, exist sure y'all accept a drill/commuter (or screwdriver) and a pencil to mark the locations of the bracket holes.

Mark the bracket holes

Marking the mounting brackets for blinds holes

Hold the bracket in place to mark the holes. An inch or and so from the edge is usually a prophylactic spot for an inside mount, equally shown, just wait at your blinds and make sure the subclass won't interfere with the internal mechanisms of the blind. If your blind came with a template for the subclass holes, use that to mark them.

Drill pilot holes

Drill airplane pilot holes

Drill pilot holes to make information technology easier to install the screws that agree the brackets.

Install the window blind brackets

Install the brackets

Hold the window bullheaded brackets in place, line upward the holes and install the screws. Repeat with the second bracket. If you don't have a drill/driver, the screws can be installed with a screwdriver, only information technology takes longer and it may exist very difficult, if not impossible, to install them with a screwdriver if the window frame is made of hardwood or metal.

Voila!

Voila!

Pop the end caps onto the elevation rail of the blinds and then place the elevation rail into the brackets. The blinds shown here snap correct onto the brackets. With some blinds, the top rail fits into the brackets and yous snap down a little flap. Test the blinds to make sure they get up and down properly. All good? Stride back and admire your work!

Install the tilt wand

Install the tilt want

Hook on the tilt wand and exam to make certain information technology tilts the slats up and downward.

Cleats

Cleats

Plastic cleats were included with our blinds. Install them and you can wrap the string effectually them when the blinds are pulled up.

Hold-down brackets

Concord-down window bullheaded brackets

Our blinds also included these hold-downward brackets. Once installed, yous tin keep the lesser rail hooked on the brackets so the blinds won't flap effectually when the window is open on a breezy day. Wind tin can as well wreak havoc on your screen door. Repair a screen door hands with these elementary steps.

Temporary solution

Temporary solution

What can yous practice if you lot need something to cover your windows correct now or you live in a edifice where you're not allowed to drill holes in your walls or window frames? Temporary shades are the answer! They're very inexpensive, take only minutes to install (yous just cutting them to fit, pare off the adhesive protector strip and stick them up!) and they don't expect half bad! Plus, when you take them downward there'southward no harm to the surface underneath.

Originally Published: June 26, 2022

Like Projects

Source: https://www.familyhandyman.com/project/how-to-install-window-blinds/

Posted by: morrisincion.blogspot.com

Share this post